Autobio analyzer integration
SamLab ships driver profiles for 5 Autobio models across immunoassay, connecting over TCP/HL7, Serial. Finished results reach result entry matched to the sample by barcode — nothing is typed twice.
Supported Autobio models
Every model below has a driver profile in the current SamLab build. If yours is a variant not listed, it very likely speaks the same protocol as its family — ask us and we will confirm it on a live connection.
- AutoLumo A2000 Plus
- AutoLumo A2000
- AutoLumo A1000
- AutoLumo A1800
- AutoLumo A6000
How a Autobio analyzer connects
TCP/HL7
The analyzer sends HL7 result messages over the lab network to SamLab’s listener. Set the SamLab PC’s IP and port in the analyzer’s LIS settings.
Serial
A direct RS-232 link. Match baud rate, parity and stop bits to the analyzer; SamLab reads the stream and parses the result records.
The link is one-way: the instrument sends results and SamLab receives them. SamLab does not send the worklist back to the analyzer, so nothing here can change what the machine runs.
Common questions
- Is my Autobio model supported?
- If it appears in the list above, yes — the profile ships in the app. If it does not, tell us the exact model; most additions are a new profile rather than new code.
- Which cable or network setting do I need?
- It depends on the model: TCP/HL7 or Serial. The analyzer’s own LIS or “host” settings screen names the protocol it uses, and the matching section above says what SamLab expects.
- Does it need internet?
- No. The analyzer and the SamLab PC talk over a cable or the local network, so results keep arriving through an internet outage.
Try the whole lab, free for 7 days.
No card. No catch. Run SamLab on your own data — online or offline — and feel the difference before you pay anything.